Single-frequency Ytterbium Fiber Laser

Single-frequency Ytterbium Fiber Laser

Count

  • Central wavelength
  • 1064 nm
  • Spectral line width
  • 0.8 ± 0.05 nm
  • Average output power
  • to 5 ± 0.1 W
  • Operation mode
  • cw
  • Mode composition of radiation
  • single mode
  • Description
  • Features

SINGLE-FREQUENCY YTTERBIUM FIBER LASER has a fully fiber optical circuit "generator - amplifier". The device emits a spectral line in the near infrared region of the optical spectrum. The working wavelength of laser radiation is 1064 nm. The spectral width of the generation line is 0.8 MHz. Output power is 5 W. Rational, economically promising technical solution was applied during the development of this laser source. This made it possible to abandon the use of expensive optical active fiber of "panda" type and fiber-optic combiners pumping.

Key features:

  • the device is devoid of the known shortcomings of solid-state and gas lasers
  • stable power and high quality laser radiation
  • it does not require liquid cooling
  • high efficiency "from the outlet"

JSC «Leningrad Laser Systems» (LLS) offers full technical support and worldwide shipping of products. We guarantee you high quality and fast supply of components and equipment! If the laser that you are going to buy, cause you any questions, you can get technical advice from our engineeres. We are recommended due to the high level of customer service by our highly qualified staff.

For more information, to receive technical advice or to place an order, please, do not hesitate to contact us.

Features
  • Parameter
    Value
  • Central wavelength
    1064 nm
  • Spectral line width
    0.8 ± 0.05 nm
  • Average output power
    to 5 ± 0.1 W
  • Operation mode
    cw
  • Mode composition of radiation
    single mode
  • Diameter of the mode field
    7 ± 0.5 µm
  • Radiation quality
    TEM00 (M2 < 1.12)
  • Polarization state 
    linear
  • Polarization coefficient
    1/100 (20 dB)
  • Optical Output Fiber
    6/125/250 µm
  • Numerical aperture
    0.15
  • Supply voltage
    220 V, 50 Hz
  • Power consumption
    in operation: 200 W / in standby: 20 W
  • Ambient temperature
    - 10 to + 50 C°
  • Air humidity
    to 80% (non-condensing)
  • Warm-up time
    no more than 5 sec.
  • Dimensions
    270/230/25 mm
  • Weight
    no more than 3 kg